StageDirect
Active direct box with two high-impedance instrument inputs, footswitch A/B selection and a mute footswitch that keeps the tuner output live. Aimed at guitarists and bassists who switch instruments or tune on stage. The page lists it as discontinued.
- Two Hi-Z inputs with A/B select footswitch
- Mute footswitch keeps tuner output active
- Remote mute via momentary footswitch on 1/4" jack
- -10dB pad, high-pass filter and 180° polarity reverse
- Powered by 48V phantom or included 15VDC supply
- Listed as discontinued
Fotos
6Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein StageDirect verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The StageDirect is an active DI with a Hi-Z input for the instrument, a thru-put for a stage amp and a balanced low-impedance output for the PA. A second Hi-Z input and an A/B select footswitch let a player change instruments without switching noise reaching the PA. A mute footswitch cuts the signal to the PA and stage amp while the dedicated tuner output stays active, so tuning between songs is silent.
The circuit pairs a class-A FET input driver with a low-noise op-amp. A -10dB pad handles hot sources such as active basses or keyboards, a high-pass filter rolls off excess low end to reduce clutter and feedback, and a 180° polarity reverse switch helps align the stage amp with the PA or move acoustic hot spots on stage. Two LEDs show whether the unit is muted or ready.
Mute can also be triggered remotely from a momentary (non-latching) footswitch on a dedicated 1/4" jack, so a stage tech can mute the instrument during a hand-off. Power comes from 48V phantom power at the console or from the included 15VDC supply.
Technische Daten
- Marke
- Radial Engineering
- Modell
- StageDirect
- Kategorie
- Live-Sound › Sonstiges Live-Equipment
Inputs
- Instrument inputs
- 2 x Hi-Z
- Input select
- A/B footswitch
- Remote mute input
- 1/4" connector for momentary (non-latching) footswitch
Outputs
- PA output
- Balanced Low-Z
- Thru-put
- For stage amplifier
- Tuner output
- Dedicated, stays active when muted
Audio
- Input stage
- Class-A FET input driver with low-noise op-amp
- Pad
- -10dB
- High-pass filter
- Switchable
- Polarity reverse
- 180°
Controls
- Footswitches
- Select and mute
- Indicators
- 2 full-sized LEDs (muted / ready)
Power
- Phantom power
- 48V from mixing console
- External power
- 15VDC power supply
General
- Part number
- R800 1170 00
- Type
- Active muting DI box
- Status
- Discontinued
In the box
- Power supply
- 15VDC power supply included