BCM 104
The BCM 104 is a cardioid large-diaphragm condenser microphone with an integrated pop screen and elastic suspension, built for radio, streaming and podcast speech. It suits broadcasters, announcers and podcasters, and also works for sung vocals and instruments.
- Fixed cardioid large-diaphragm condenser for speech
- Integrated pop screen and elastic suspension
- Internal switches: 100 Hz low cut and -14 dB pad
- Self-noise 7 dB-A; max SPL 138 dB (152 dB with pad)
- Transformerless balanced XLR output, 48 V phantom
- Nickel and black (mt) finishes
Fotos
6Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein BCM 104 verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The BCM 104 is a phantom-powered large-diaphragm condenser microphone with a fixed cardioid pattern. Its capsule was developed for speech, and the transformerless output keeps hum low and gives good rejection of interference from sources such as computer screens. The housing is shaped for standard boom arms and includes an elastic mount against structure-borne noise.
An internal pop screen sits behind the headgrille, and the grille twists off for cleaning. Two switches inside the body set a 100 Hz low cut, which helps with close-speech proximity effect, and a -14 dB pre-attenuation for equipment designed around dynamic microphones. A subsonic filter suppresses frequencies below 20 Hz. The response is fairly linear, with a gentle presence lift around 4 kHz and a slight treble rise above 10 kHz.
The microphone connects through a balanced XLR output and runs on 48 V phantom power. It is offered in nickel and in black (BCM 104 mt). Listed accessories include pop screens, a windscreen, a power supply, a swivel joint and a cable.
Video
Technische Daten
- Marke
- Neumann
- Modell
- BCM 104
- Kategorie
- Studio › Mikrofone
Audio
- Acoustical operating principle
- Pressure gradient transducer
- Directional pattern
- Cardioid
- Frequency range
- 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 22 mV/Pa = –33.1 dBV ± 1 dB
- Sensitivity at –14 dB attenuation
- 4.4 mV/Pa
- Equivalent noise level, CCIR
- 18 dB
- Equivalent noise level, A-weighted
- 7 dB-A
- Max. SPL for THD 0.5%
- 138 dB
- Max. SPL for THD 0.5% with pre-attenuation
- 152 dB
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 76 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 87 dB
- Switchable low cut
- 100 Hz
- Pre-attenuation
- –14 dB
Outputs
- Rated impedance
- 50 ohms
- Rated load impedance
- 1 kohms
- Maximum output voltage
- 10 dBu
- Matching connector
- XLR 3 F
Power
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 3.2 mA
Physical
- Weight
- 500 g
- Diameter
- 64 mm
- Length
- 85 mm
- Height
- 110 mm (without suspension)
- Finishes
- Nickel (BCM 104), black (BCM 104 mt)
In the box
- BCM 104 mt order contents
- 1 x BCM 104 mt, 1 x Safety Guide, 1 x Quick Guide