M22 V2
The M22 V2 is a stereo power amplifier from NAD that delivers 300 W per channel into 8 or 4 ohms and can be bridged to mono for 900 W. It suits hi-fi systems that need a high-power, low-distortion amplifier stage. The model is listed as archived and no longer sold.
- 300 W per channel into 8 and 4 ohms (stereo)
- Bridge mode: 900 W into 8 ohms
- THD+N below 0.005%
- Damping factor above 800
- Auto trigger from 5 mV input signal
- Standby power below 0.5 W
Fotos
5Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein M22 V2 verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The M22 V2 is a two-channel power amplifier. In stereo mode it supplies 300 W per channel into 8 ohms and 4 ohms from 20 Hz to 20 kHz at 0.1% THD with both channels driven. In bridge mode it can be run as a mono amplifier rated at 900 W into 8 ohms. IHF dynamic power in stereo mode is 400 W into 8 ohms.
Measured performance is specified as THD+N below 0.005% from 250 mW to 290 W, a signal-to-noise ratio above 100 dB (A-weighted, referenced to 1 W in 8 ohms) and a damping factor above 800. Frequency response is flat to within ±0.1 dB from 20 Hz to 20 kHz. Input sensitivity for full 300 W output into 8 ohms is 1.73 V, and the gain level is listed as 19 dB (Low).
The amplifier includes an auto-trigger function that responds to an input signal of 5 mV at 1 kHz, and standby consumption is under 0.5 W. It measures 435 x 103 x 379 mm and weighs 8.9 kg. Manuals in several languages, a quick setup guide, a data sheet and a HybridDigital white paper are available as downloads.
Video
Technische Daten
- Marke
- NAD
- Modell
- M22 V2
- Kategorie
- Hi-Fi und Heimaudio › Verstärker
Audio
- Continuous output power, stereo (8 and 4 ohms)
- 300 W (20 Hz-20 kHz at 0.1% THD, both channels driven)
- Continuous output power, bridge mode (8 ohms)
- 900 W (20 Hz – 20 kHz at 0.1% THD)
- THD+N
- <0.005 % (250 mW to 290W, 8 ohms and 4 ohms)
- Signal-to-noise ratio
- >100 dB (A-weighted, ref. 1 W in 8 ohms)
- Clipping power, stereo (1 kHz, 8 ohms, 0.1% THD)
- >300 W
- Clipping power, bridge (1 kHz, 8 ohms, 0.1% THD)
- >950 W
- IHF dynamic power, stereo (1 kHz, 1% THD)
- 8 ohms: 400 W
- Damping factor
- >800 (ref. 8 ohms)
- Frequency response
- ±0.1 dB (20 Hz - 20 kHz)
- Input sensitivity (for 300 W in 8 ohms)
- 1.73 V
- Gain level
- Low: 19 dB
Power
- Minimum input level for auto trigger
- 5 mV at 1 kHz
- Standby power
- <0.5 W
Physical
- Gross dimensions (W x H x D)
- 435 x 103 x 379 mm
- Net weight
- 8.9 kg (19.6 lbs)
- Shipping weight
- 15 kg (33.1 lbs)