iTrack Solo
The iTrack Solo is a two-input USB audio interface with a mic preamp and an instrument input, built for recording on Mac, PC and Lightning iPads. It suits songwriters and home recordists who want a simple, bus-powered way to capture and monitor audio.
- 1 XLR mic input and 1 ¼" instrument input
- 48V phantom power and direct monitor switch
- Up to 96 kHz on Mac/PC, 48 kHz on iPad
- USB 2.0 bus power; mains needed with iPad
- DEVICE LINK port for Lightning iPads
- Includes Ableton Live Lite 9 and Scarlett plug-ins
Fotos
8Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein iTrack Solo verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The iTrack Solo combines an XLR microphone input with a separate ¼" unbalanced instrument input, each with its own gain control and a gain halo that shows signal level. A 48V phantom power switch serves condenser microphones, and a direct monitor switch lets the player hear the input without latency. A large monitor dial sets the level of the headphone output and the line outputs.
Playback goes through two unbalanced RCA phono outputs for speakers and a ¼" TRS headphone jack. Conversion runs at up to 96 kHz on Mac and PC, and at 44.1 or 48 kHz on iPad. The interface is housed in a bead-blasted aluminium case.
On a computer it connects over USB 2.0 and takes its power from the USB port. For a Lightning iPad it uses a DEVICE LINK port and cable, and in that case the unit needs to be plugged into mains power. Ableton Live Lite 9 and the Scarlett plug-in suite are included for Mac and PC use.
Video
Technische Daten
- Marke
- Focusrite
- Modell
- iTrack Solo
- Kategorie
- Studio › Audio-Interfaces
Inputs
- Microphone input
- 1 x XLR
- Instrument input
- 1 x ¼" unbalanced
- Gain knobs
- 2
- Gain halo signal indicators
- 2
- Phantom power
- 48V switch
- Mic gain range
- +10dB to +55dB
- Mic max input level
- +4dBu
- Instrument gain range
- -10dB to +55dB
- Instrument max input level
- +2dBu
Outputs
- Monitor outputs
- 2 x unbalanced RCA phono
- Headphone output
- 1 x ¼" TRS jack
- Nominal output level
- 0dBFS = 10dBu, unbalanced
- Monitor level dial
- Controls headphone and line level outputs
- Direct monitor
- Switch
Connectivity
- USB
- USB 2.0 port
- iPad connection
- DEVICE LINK port
- Security
- Kensington Lock slot
- Compatible iPads (Lightning model)
- Any iPad with Lightning connector
- Compatible iPads (standard model)
- iPad (1st gen), iPad (2nd gen) and iPad (3rd gen)
Audio
- Supported sample rates (Mac and PC)
- 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Supported sample rates (iPad)
- 44.1 kHz, 48 kHz
- A-D dynamic range
- 105dB A-weighted (converter chipset 114dB)
- D-A dynamic range
- 105dB A-weighted (converter chipset 114dB)
- Mic frequency response
- 20Hz - 20kHz +/- 0.2 dB
- Mic THD+N
- < 0.002%
- Mic EIN
- < -120dB
- Instrument THD+N
- 0.003%
- Output THD+N
- < 0.001%
- Clock source
- Internal clock only
Power
- Power (computer)
- USB bus powered
- Power (iPad)
- Mains connection required
Physical
- Height
- 45 mm / 1.77"
- Width
- 150 mm / 6"
- Depth
- 100 mm / 4"
- Weight
- 500 g / 1 lb
- Case
- Bead-blasted aluminium
Software
- Included software
- Ableton Live Lite 9
- Included plug-ins
- Focusrite Scarlett plug-in suite
In the box
- Interface
- iTrack Solo
- USB cable
- 1.2m
- DEVICE LINK cable
- 1.2m, for Lightning iPad
- Documents
- Getting started guide, registration card
- Software download card
- Ableton Live Lite / Scarlett Plug-in Suite
- USB power supply
- US only