Ecler WiSpeak CUBE
WiSpeak CUBE is a self-powered 5-inch two-way loudspeaker that receives audio wirelessly from a paired WiSpeak transmitter. It suits retail, hospitality, education, corporate and fitness installations that need a speaker mounted on a lighting rail, wall or desk.
- 5" woofer + 1" tweeter, 32 W RMS / 128 W peak
- Wireless 24-bit / 48 kHz audio, range up to 12 m
- Latency under 6 ms to speaker and AUX OUT
- Lighting rail mount and wall/surface mount included
- Balanced AUX OUT on Euroblock; white or black
Fotos
7Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein Ecler WiSpeak CUBE verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
WiSpeak CUBE is a powered loudspeaker cabinet with a 5-inch woofer and a 1-inch tweeter. It receives uncompressed 24-bit, 48 kHz digital audio over a 5 GHz wireless link from the transmitter it is paired with, and it is managed by the WiSpeak Master unit. The amplifier delivers 32 W RMS and 128 W peak into the 8 ohm drivers.
The cabinet comes with a lighting rail mount for 4-wire, 3-circuit track systems and a surface or wall mount with pan and tilt, so it can also sit on a desk, shelf or wall. Mains power can be taken from the rail bracket or from the supplied external AC cable. Volume, solo, ID test signal and pairing are set from the WiSpeak grip app, and pairing can also be done with a button on the back panel. LED indicators on the front show status.
An analogue balanced AUX OUT on a Euroblock connector carries a copy of the received signal. It can feed another WiSpeak transmitter to extend the network, or external amplifiers, mixers or subwoofers. The enclosure is ABS with an aluminium grille, in white or black.
Technische Daten
- Marke
- Ecler
- Modell
- WiSpeak CUBE
- Kategorie
- Live-Sound › Funksysteme
Wireless
- Frequency band
- 5.18~5.32 GHz, 5.55~5.825 GHz
- RF channels
- Up to 24 non-overlapping
- DFS support
- Yes
- Coverage range
- Up to 12 m from TX, direct line of sight
- Audio transmission
- 24 bit uncompressed, 48 kHz
- Latency (TX IN to RX speaker / AUX OUT)
- <6 ms
- Pairing / reconnection time
- Up to 120 s
Audio
- Drivers
- 5" woofer, 1" tweeter (2-way)
- Effective frequency range
- 70 - 20 kHz
- Coverage angle
- 150 x 150 (HxV)
- Sensitivity
- 83 dB (1W/1m)
- Maximum SPL
- 98 dB continuous / 104 dB peak
- Nominal impedance
- 8 Ω
- Power
- 32 W RMS / 128 W peak
- THD + Noise
- <0.15% @ 1 kHz full power
- Signal-to-noise ratio
- >95 dB at RX AUX OUT
Inputs and outputs
- Audio inputs
- CH1 / CH2: digital, mono, RF wireless audio
- AUX OUT
- Analogue, mono, balanced, Euroblock
- Input sensitivity
- 0 dBV / 10 kΩ
Power
- Power supply
- Universal, internal
- AC mains
- 100-240 VAC, 50-60 Hz
- Power consumption
- 15 W (rated)
Control
- Control
- WiSpeak grip app (volume, solo, ID test signal, pair/unpair)
- Panel controls
- Pair/unpair button, WiS and STR LEDs
Physical
- Enclosure
- ABS cabinet, aluminium grille
- Dimensions (WxHxD)
- 173 x 180 x 181 mm / 6.81 x 7.09 x 7.13 in
- Weight
- 2.1 kg / 4.6 lb
- Colours
- White (RAL 9003), black (RAL 9005)
- Operating temperature
- -10°C to 40°C / 14°F to 104°F
- Rail system
- 4 wire 3 circuit track, Global Trac Pro or compatibles
- Certifications
- FCC, EMC, CB
In the box
- Included accessories
- Lighting rail mount, surface / wall mount
- Pieces per box
- 1 unit