Sunn O))) HalfLife
EarthQuaker Devices Nicht mehr erhältlich

Sunn O))) HalfLife

A compact two-footswitch pedal from EarthQuaker Devices, made with Sunn O))), that combines an analog octave-up, an op-amp distortion with three clipping modes, and a clean MOSFET booster. It suits guitarists who run heavy, saturated tones into tube amps.

  • Analog octave, distortion and clean booster in one pedal
  • Signal path: Octave > Distortion > Boost
  • Three-way clipping switch: OpAmp, Asymm, Symm
  • Separate footswitches for distortion and booster
  • Octave EXP jack for expression pedal control
  • Flexi-Switch relay true bypass, latching or momentary
So eins verkaufen

Fotos

8

Anzeigen

Noch keine Anzeigen für dieses Modell

Wenn jemand ein Sunn O))) HalfLife verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.

So eins verkaufen

Beschreibung

HalfLife is a smaller version of the Life Pedal circuit. The signal runs through an analog octave, then a distortion, then a booster. The distortion and the booster each have their own footswitch, so they can be used separately: the right switch controls the octave distortion and the left switch controls the booster.

The octave is a discrete full-wave rectifier at the input. It is monophonic and works best on single notes above the twelfth fret with the neck pickup. The distortion is based on a classic op-amp design and has a three-way clipping switch (OpAmp with no diodes, Asymmetric, Symmetric). A low-pass filter shapes the highs. The booster uses a MOSFET stage and is clean and high impedance, intended to push the preamp tubes of an amp harder.

An expression pedal can be plugged into the Octave EXP jack to control the octave blend. Both footswitches use relay-based true bypass with Flexi-Switch, which allows latching or momentary use. The pedal runs from a 9 V DC supply with a 2.1 mm negative-center barrel. Because the switching is relay-based, it needs power to pass signal.

Video

Technische Daten

Marke
EarthQuaker Devices
Modell
Sunn O))) HalfLife
Kategorie
Effekte und Pedale

Controls

Octave (O)
Blends in the analog octave as turned clockwise
Filter (F)
Low pass filter, approx. 500 Hz to 30 kHz
Distortion (D)
About +60dB of gain
Magnitude (MAG)
Booster output volume, unity around noon
Amplitude (AMP)
Output volume for the octave distortion side
Clipping switch (CLIP)
OpAmp / Asymm / Symm
Footswitches
Magnitude (booster) and Amplitude (octave distortion)

Inputs

Octave distortion input impedance
1 MΩ
Booster input impedance
500 kΩ
Octave EXP jack
Connect any expression pedal to control octave blend

Outputs

Octave distortion output impedance
<1 kΩ
Booster output impedance
<1 kΩ

Audio

Signal path
Octave > Distortion > Boost
Octave circuit
All-discrete analog full-wave rectifier
Booster circuit
All-discrete MOSFET, clean
Switching
Flexi-Switch relay-based true bypass (latching or momentary)

Power

Power supply
9 V DC, 2.1 mm negative center barrel
Current draw
15 mA

Physical

Dimensions
5.00 × 2.75 × 2.25 in. (127 × 70 × 57 mm) with knobs

Warranty

Warranty
Limited lifetime warranty

Dokumente

PDF BedienungsanleitungPDF · vom Hersteller

Daten: earthquakerdevices.com; Fotos: EarthQuaker Devices product page · aktualisiert 2026-10-13 · Fehler gefunden? Schreib uns