AMP1
Compact stereo integrated amplifier with a built-in digital-to-analogue converter, rated at over 40 W per channel into 4 or 8 ohms. It accepts line, phono and digital sources and has been archived by the maker and is no longer sold.
- Over 40 W per channel into 4 and 8 ohms
- Built-in DAC, up to 24-bit/192 kHz
- THD below 0.03% at rated power
- Line, phono and digital inputs
- Network standby under 3 W
- Archived by the maker, no longer sold
Fotos
5Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein AMP1 verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The AMP1 is a small-footprint integrated amplifier that combines a power stage with a DAC. It is rated at more than 40 W per channel into 4 and 8 ohms with both channels driven, with IHF dynamic power of 100 W into 4 ohms and 50 W into 8 ohms. Distortion is below 0.03% across 20 Hz to 20 kHz at rated power.
On the input side it has line, phono and digital inputs. The digital section supports up to 24-bit/192 kHz material, and the optical input is the reference for the quoted signal-to-noise figure of over 106 dB (A-weighted). Frequency response is within ±0.3 dB from 20 Hz to 20 kHz. Standby draw is under 0.5 W when off and under 3 W in network standby.
The chassis measures 220 x 63 x 252 mm and weighs 4.85 kg. The maker lists a data sheet and English and Dutch manuals for download, and marks the model as archived.
Video
Technische Daten
- Marke
- NAD
- Modell
- AMP1
- Kategorie
- Hi-Fi und Heimaudio › Verstärker
Audio
- Rated output power (4 and 8 ohms, stereo)
- >40W (at rated THD, 20-20kHz, both channels driven)
- IHF dynamic power
- 4 Ohm 100W, 8 Ohm 50W
- THD (20Hz - 20kHz)
- <0.03% (Rated power, 8 Ohms and 4 Ohms)
- Signal/noise ratio
- >106dB (A-weighted, Optical input, ref. 40W out in 8 Ohms)
- Clipping power
- >50W (at 1kHz 0.1% THD)
- Frequency response
- ±0.3dB (20Hz-20kHz, 4-8 Ohms load)
- Supported bit rate/sample rate
- Up to 24bit/192kHz
Inputs
- Input sensitivity (for 40W in 8 Ohms)
- Line In: 450mV Digital In: -5dB FS
- Maximum input signal
- >2.1Vrms (ref. 0.1% THD)
- Input sensitivity, Phono
- 5mV (ref 40W 1kHz 8 Ohms out, volume maximum)
Outputs
- Output impedance
- 220 Ohms
- Maximum voltage output
- >2.0V (ref. 0.1% THD)
Power
- Standby power
- <0.5W (Off-mode), <3W (Network standby)
Physical
- Dimensions (W x H x D)
- 220 x 63 x 252mm (8 5/8 x 2 1/2 x 10 in)
- Net weight
- 4.85kg (10.7lb)
Software
- Downloads
- Data sheet (PDF), manuals in English and Dutch (PDF)