12sHO
The 12sHO is a 400 W active studio subwoofer with a 12" woven Kevlar woofer, intended to extend the low end of near-field monitors in stereo or surround setups. It has a dedicated LFE input, a sweepable crossover and an included bypass footswitch.
- 12" woven Kevlar woofer, 400 W Class A/B amplifier
- Bass extension to 29 Hz, max SPL 123 dB
- Dedicated LFE input plus L/R inputs and XLR outputs
- Sweepable crossover control
- Bypass footswitch included
- Reinforced MDF enclosure, 49.7 kg
Fotos
6Anzeigen
Noch keine Anzeigen für dieses Modell
Wenn jemand ein 12sHO verkauft, erscheinen hier die Anzeigen und der Verkaufsverlauf.
So eins verkaufenBeschreibung
The 12sHO is a front-loaded, vented active subwoofer built for studios that need to reproduce deep bass and the LFE channel of surround formats at high levels. It uses a 12" woven Kevlar woofer driven by a 400 W Class A/B amplifier, with a quad-vented front-firing port. Bass extends down to about 29 Hz and the maximum peak SPL is 123 dB.
For integration, it has combo XLR/quarter-inch TRS inputs for left and right, a separate LFE input and balanced XLR outputs for passing the signal on. A sweepable crossover sets the hand-off to the main monitors, a ground lift switch is fitted, and the high-pass filter can be bypassed with the supplied footswitch. Indicators show power, protection and limiter status.
The enclosure is reinforced MDF (18 mm and 36 mm) with a textured paint finish. The mains input is selectable between 110–120 V and 220–240 V. The cabinet weighs 49.7 kg (109.7 lb).
Video
Technische Daten
- Marke
- KRK
- Modell
- 12sHO
- Kategorie
- Studio › Studiomonitore
Audio
- Configuration
- Front Loaded, Vented Subwoofer
- System type
- Active Subwoofer
- Low-frequency transducer
- 12" Woven Kevlar® High Performance Woofer
- Frequency response
- 29.2Hz - 160Hz (L/R inputs), 29.1Hz - 211Hz (LFE input)
- Max peak SPL
- 123 dB
- Signal to noise ratio
- 92 dB
- Crossover
- Sweepable
Amplifier
- Amplifier class
- Class A/B
- Power output (continuous)
- 400 Watts @ 1% THD+N @ 100Hz
- Distortion (THD+N)
- ≤ 0.1% @ -3dB of max power output, 20Hz-200Hz
Inputs
- L/R inputs
- Combo XLR-1/4" TRS, balanced
- LFE input
- Combo XLR-1/4" TRS, balanced XLR
- Input impedance
- 10 KΩ Balanced or Unbalanced
Outputs
- Output connectors
- Balanced XLR for Left & Right
Controls and indicators
- Ground lift
- On/Off
- HPF bypass
- With Footswitch Only
- Indicators
- Power, Protection, Limiter
Power
- AC power input
- Selectable 110V-120V / 220V-240V
Physical
- Enclosure
- 18mm & 36mm Reinforced MDF
- Finish
- Textured Paint
- Dimensions (H x W x D)
- 20" (508 mm) x 20" (508 mm) x 22.48" (571 mm)
- Weight
- 109.7 lb. (49.7 kg)
In the box
- Footswitch
- Included